Shenzhen Hengstar Technology Co., Ltd.
| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CIF,EXW |
| Min. Order: | 1 Piece/Pieces |
| Transportation: | Ocean,Air |
| Port: | Shenzhen |
Brand: HENCSTAR
Aspect Ratio: 16:10
Server: OEM/ODM
Response Time: TR6ms TF6ms
Pixel Pitch: 0.2505(H)mm X 0.2505(V)mm
Resolution: 1920 X 1080(WQXGA)
View Angle: L / R: 89/89 , U / D:89/89
Luminance: 280 Nits
Contrast Ratio: 1000(MIN.)
Colors: 8Bits-true 16.7M Colors
| Selling Units | : | Piece/Pieces |
| Package Type | : | packed in Standard Carton as per required |
This industrial touch display is capable of providing a tactile touch interface system that relies on actuators to produce a tactile sensation. The development of actuators and control technology enables actuators to support a variety of touch feedback from small to large touch panels and touch screens. The product range covers products from mobile phones to widescreen touch monitors. In addition, the processor load required to support haptic systems is relatively small, touch input technology is actually very popular, and electromechanical solutions are also readily available. The usual interpretation of haptic technology for touch-activated control is that the full motion of a button or switch must be fully replicated to be most effective. But in fact, the perceptual sensitivity of human fingers is not so low. Numerous studies have found that neurons in human fingers can detect very small movements if combined with appropriate acceleration. Under acceleration conditions above 1.5g, only 0.1mm of motion can be perceived by humans as a confirmation response. However, the minimum acceleration of 1.5g is not enough to produce the best tactile effect. A more effective haptic effect can be produced by generating an acceleration and a displacement with a stronger stimulus. These accelerations and displacements can be seen in the "phase portraits" shown in this article. Phase diagrams can be generated after successful integration of haptic technology into haptic interface devices through electromechanical methods.
LCD screen
Covered with 3 mm explosion-proof glass
Enhanced LED backlight, readable in sunlight
Full HD 1920 * 1080 resolution
industrial display monitors
●Solid structure, rugged 15mm Aluminum Frame Rugged rack-mounted for industrial purpose.
●Easily mounted the touch screen(optional), tempered glass display surface box, avoid dust, waterproof, avoid vibration.
●Suitable for large electromagnetic interference and low power consumption of industrial one-site human machine interface, process control and other occasions.
●VGA input, the cable longest up to 5M.
●Can use air interface, hard steel materials, the panels look elegant and generous.
●Low-E characteristics of LCD screen is not flashing, compared to the traditional CRT, can reduce the dim age to your eyes.
Product Specification
Panel specification Size 32” Aspect Ratio 16:10 Pixel Pitch 0.2505(H)mm x 0.2505(V)mm Resolution 1920 x 1080(WQXGA) View angle L / R: 89/89 , U / D:89/89 Luminance 280 nits Contrast ratio 1000(MIN.) Response time TR6ms TF6ms Colors 8Bits-true 16.7M colors Video format Support PAL/NTSC/ASCEM etc. Port VGA,CVBS Horizontal Frequency 67.5KHZ Vertical Frequency 60HZ Display System Main Chip (STDP9320 ) 10ns 48% to 52% 2.5W low TDP Memory 256MB Signal I/O 1 *HDMI，1*DVI-I , 1 *VGA，1*USB Audio 1* Audio Output(Optional) Power requirement +24V +12V,+5V,+5V VSB, PS-ON Rear Panel I/O 1*VGA Waterproof Connector 2*DVI-I Waterproof Connector 1*HDMI NA HDMI-W Connector-19Pin 1*AC D38999 Connector-5Pin 1*VGA Waterproof Connector 2*DVI-I Waterproof Connector 1*HDMI NA HDMI-W Connector-19Pin 1*USB NA USB-W Connector-4Pin 1*AC D38999 Connector-5Pin Video SYSTEM System Supported PAL/SECAM/NTSC Signal system B/G,D/K,I,L/L,M/N Stereo SRS TruSurround XT Power: 10W*2 (Optional) QUALITY APPROVAL Fire-resistance UL-94HB Water-resistance NeMa4 Chemical-resistance Active area of Touch is resistant for acetone(Optional), toluene, butanone, acetylacetone, methanol, acetic acid, gas, coal oil, and Vinegar. Certificate RoHS 、FCC（Part 15）、CE（EN55022 and EN55024）Optional Support MIL-STD-810G ( check below for Detail)
1*USB NA USB-W Connector-4Pin
Mechanical Drawing
industrial display monitors Application
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now