Installation method and precautions of embedded industrial tablet computer

industrial tablet computer is an all-in-one computer used in the industrial field. It has the characteristics of waterproof and dustproof, earthquake resistance, anti electromagnetic interference, stable performance and long-term operation. Therefore, it is widely favored by customers. At present, industrial tablets have been widely used, but many people don't know much about the installation methods and precautions of embedded industrial tablets. Let's introduce Hengstar to you.
One: Installation method of embedded industrial tablet computer
1. First place the fuselage in a stable place and insert the base into the fuselage accurately.
2. Screw in the screw, screw the screw into each hole and confirm whether it is tightened.
3, before cleaning the screen of the embedded industrial tablet computer, first stop using the equipment and unplug the power plug, so that the device is in a power failure state. Do not use the spray directly on the monitor screen.

4. The touch screen should be cleaned from time to time. If there is dust and dirt on the surface, it can be scrubbed with a towel or soft object. It is recommended to use a cleaning method without corrosion to the glass.

Industrial Tablet Pc

Two: Precautions for embedded industrial tablet
1. As embedded industrial tablets are widely used in public places, unstable voltage may cause equipment damage. It is recommended to use stable mains power, and never use the same power supply with high-power equipment such as elevators.
2. Place the embedded industrial tablet in a ventilated, dry environment without strong direct light, and keep the equipment from rain and moisture; More than 250px heat dissipation space shall be reserved around the equipment. In order to ensure normal operation, the continuous switching time shall not be less than 10 seconds. Please pay special attention when using in the bathroom, swimming pool, etc.
3. Do not place the embedded industrial tablet computer equipment in a sealed place, or cover the equipment or block the ventilation hole of the equipment, so as to prevent damage caused by excessive temperature in the chassis when the equipment is working.
4. Before turning on the power supply, be sure to check whether the host, industrial display and touch screen are connected properly. Turn on the power supply only after confirmation.
5. Please use the installation devices and accessories specified by the industrial tablet manufacturer. Avoid stepping on or clamping the AC power cord, plug or power adapter.
6. Do not disassemble or repair the embedded industrial tablet by yourself to avoid high-voltage electric shock or other hazards. The correct approach is to invite professional maintenance personnel to complete all maintenance work.
7. Unplug the power plug of the machine during thunderstorm or when it is not used for a long time. During transportation and use, try not to touch the LCD screen, do not squeeze the LCD screen, do not let sharp tools and hard objects cut and hurt the LCD screen, so as to avoid damage to the LCD screen.